Ground-based harvesting operations of Pinus taeda affects structure and pore functioning of clay and sandy clay soils

Publication date: 1 December 2018
Source:Geoderma, Volume 331
Author(s): José Miguel Reichert, Nirlene Fernandes Cechin, Dalvan José Reinert, Miriam Fernanda Rodrigues, Luis Eduardo Akiyoshi Sanches Suzuki
Intense mechanization during forest harvesting and timber extraction degrades soil structure and affects pore functioning, but no studies have clearly distinguished the response of composition and functional soil properties to pine harvest in a subtropical environment. This paper describes the effect of mechanized harvesting of Pinus taeda L. on compaction and pore functioning of two subtropical Alfisols intensively used for commercial forest production in southern Brazil. The study was conducted in a 17-year old commercial forest of P. taeda on clay and sandy clay Hapludalf soils. Soil conditions tested were a control, i.e., before harvesting (BH); after tree felling (AF) in the full tree system; after timber dragging with one skidder pass (A1P); after timber dragging with three skidder passes (A3P); and after timber removal from stocking yard (TY). We evaluated composition (bulk density, degree-of-compactness, total porosity, and macroporosity) and functional (saturated hydraulic conductivity, precompression stress, compressibility coefficient, and penetration resistance) soil properties. The results show the upper soil layer is the most vulnerable to compaction, which significantly impairs pore functioning. Nevertheless, machine wheeling may affect subsurface layers (down to at least 0.40 m, as tested herein) depending on soil type, moisture and structure. Three passes of the skidder resulted in greatest degree-of-compactness, high bulk density, low macroporosity (below the critical level), reduced hydraulic conductivity (nearly water impermeable), and increased resistance to penetration (above the critical limit of 2 MPa). Pine harvest residues (9.8–15.6 Mg ha⁻¹, corresponding to 7.3–8.2 cm height) were insufficient to dissipate stress applied by skidder intense wheeling. We show planning of harvesting activities must consider reducing traffic intensity and/or establishing permanent traffic routes to ensure minimum damage on forest soils, particularly on their functional soil properties.